Jolifin LAVENI UVA light curing device - Infinity

in stock
24h Express delivery

€29.95

€54.95

incl. VAT plus shipping costs

Need help? We are available
for you 7 days a week.

Secure shopping.
30 day return policy

Description + Application + Reviews (0)

Questions & Answers +

Jolifin LAVENI UVA light curing device - Infinity for curing nail modelling

Jolifin LAVENI UVA light curing device - Infinity for ideal curing of nail modelling. The high-quality workmanship of the UVA device with four Infinity tubes and a complete mirror coating on the inside allows your modelling to harden gently and evenly. With an integrated 2-minute timer and a convenient continuous function, this device fulfils all requirements. The on/off switch is located on the back of the device and the 2-minute timer function is triggered by a short press. Pressing the timer button for longer activates the continuous function, which is deactivated by switching it off at the back. The interior of the UV device can be cleaned with a surface disinfectant and the top is labelled with the decorative Jolifin LAVENI logo. The base of this UV lamp can be pulled out quickly and easily, making cleaning and disinfecting the interior as well as inserting and changing the tubes particularly convenient.

Features:

with pull-out base plate
incl. 4 x Jolifin LAVENI UVA tube - Infinity
special plug-in base with extra gentle curing tubes
manufactured according to CE guidelines
Timer button on the back of the device
with continuous function
Length 240 mm
Width 220 mm
Height 100 mm

Application for:	Beginner, Domestic use, Studio supplies
Colour:	white
Curing:	UVA
Feature:	Hygienic base plate, Light barrier
Variant:	Curing

Application:

Press the on/off switch
Place your hand in the interior with the device switched on
allow the gel to harden according to the specified time

The appliance has a 2-minute timer function. If desired, you can activate a continuous function by switching the toggle switch to "l". The continuous function is interrupted by switching off the appliance.

Replacing the tubes:

If the appliance still does not start, this is usually due to a defective tube and only very rarely to a fault in the appliance. In the appliance, the two slots on one side are always connected in pairs, i.e. top and bottom left and top and bottom right. This means that if a tube is defective, two sockets will not light up, i.e. one side. If there is a defective tube on each side, the entire device will not switch on. To find the fault or the defective tube, proceed as follows:

If one side fails: Move the tubes within the appliance one place at a time. If the failed tube pair changes at the latest on the second reconnection, the last tube plugged in is defective. This tube usually also rattles. Replacing tubes in pairs does not help because, as described above, the parallel connection only shifts the problem from one side to the other.

In the event of complete failure: First swap the two upper tubes with each other, then one of the lower tubes with one of the upper tubes of the other pair of tubes. If nothing still works, either more than two tubes or the device is defective. Unfortunately, it is not possible to find out without another set of test tubes. In the event of an actual defect in the tubes or the appliance, please contact us so that we can clarify the next steps with our staff.